I-SAE 1010 Ezotyiweyo eBanda iSihlomelo soMbhobho weNtsimbi ongenaMthungo

I-SAE 1010 Ezotyiweyo eBanda iAnealing iSimbi iPipe engenaMthungo eFakelweyo

Inkcazelo emfutshane:

I-Haihui Steel ngumthengisi wabucala, umenzi, umthengisi kunye nomthengisi we-ASTM / ASME SA519 SAE1010 Cold Drawn Seamless steel pipe.ASTM A519 Grade 1010 carbon steel mechanical pipe are Low Carbon Steel kunye 0.08-0.13 % carbon content kunye ne-%-0.6030% indibaniselwano ye-0.6030% manganese.

I-ASTM A519 yethu yeBanga le-1010 ezibonelelwayo ziiTubing ezixabisa kancinci ukuqulunqa nokumila.I-ASTM A519 GR.1010 Iityhubhu yoomatshini yaziwa ngokubanzi phakathi kwabathengi bethu ngokuhlala ixesha elide kunye nobukhulu.I-ASTM A519 carbon steel ebandayo iityhubhu ezingenamthungo Gr.1010 iveliswa ngobuninzi ukusuka kwibakala eliphezulu lemathiriyeli ekrwada ngoncedo lobuchwepheshe obuphambili.Sinokuthengisa i-ASTM A519 SAE1010 ipayipi yentsimbi engenamthungo ngexabiso elifanelekileyo.

Ukuba kukho nayiphi na imfuneko yokusetyenzwa kweBanga le-1010 iCold rolled Seamless Steel Pipe, singayiphatha.Sinoluhlu olupheleleyo lwe-ASTM A519 yeBanga le-1010 iCarbon Steel Seamless Steel Pipe ukusuka kubukhulu be-OD 18mm-89mm.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Imibhobho Specifications

Umgangatho: ASTM A519 / ASME SA 519

Ubungakananiububanzi: 16mm-89mm

Ishedyuli: 10-XXS / Thk

Ubume: Amacandelo ajikelezayo okanye awodwa.

Ubude: Ubude obubodwa obungenamkhethe/ Ubude obuphindwe kabini obungenamkhethe okanye njengesicelo esinyanisekileyo somthengi

IBanga: SAE 1010

Imeko: Umthengi uya kuchaza indlela yokulinganisa kwaye, ukuba kuyimfuneko, unyango lwe-thermal.

Iindlela zokulinganisa:

I-ASTM i-A519 yeBanga le-1010 i-Hot-Finished Mechanical Tubing

2. ASTM A519 Grade 1010 Cold-Worked Mechanical Tubing

3. I-ASTM A519 Grade 1010 Rugh-Turned Mechanical Tubing

4. I-ASTM A519 iBakala 1010 iGround Mechanical Tubing

HF-Hot Kugqityiwe,

I-CW-Cold isebenze,

I-RT-Rough ijikile,

G- Umhlaba.

Unyango olushushu:

A-Anealed,

N– Iqhelekile,

I-QT-Icinyiwe kwaye inomsindo,

I-SR-Stress iNcinyiwe okanye Ukugqiba i-Aneal

I-ASTM A519 SAE1010 Umbhobho wentsimbi ongenamthungo wokuMiselwa kwemichiza (%)

IBanga	C	Mn	P<=	S<=
1010	0.08-0.13	0.30-0.60	0.040	0.050

I-SAE 1010 yombhobho wentsimbi ongenamthungo otsalwa ngokubanda unamandla aphezulu, awucimeki kangako kwaye awukho brittleness.I-deformation ebandayo ineplastiki ephezulu kwaye isetyenziselwa ukugoba, i-calendering, ukugoba kunye ne-hammer arch processing.Ukusebenza kwe-welding yombane we-arc welding kunye ne-welding yoqhagamshelwano kulungile.Ubukhulu be-welding yegesi buncinci, kwaye iintanda akulula ukuba zenzeke kwiindawo ezineemfuno ezingqongqo zemilo okanye iimilo ezinzima.Ubuchwephesha bomzobo obandayo okanye ubume obuqhelekileyo bungcono kunobume be-annealing, obusetyenziswa ngokubanzi kwimveliso enoxinzelelo oluphantsi kunye neemfuno zokuqina okuphezulu.

Ukunyamezelwa koBungqindilili boDonga kuMbhobho wentsimbi oNqandayo oThatywayo ongenamthungo:

Unyamezelo lokutyeba kodonga lweMibhobho eQilileyo ebandayo
Ukutyeba kodonga S/ Ngaphandle koMdaniso D (%)	Ukunyamezela ukutyeba kweendonga (±%)
Ukutyeba kodonga S/ Ngaphandle koMdaniso D (%)	Ngaphakathi Ububanzi D <38.1mm	Ngaphakathi Ububanzi >= 38.1
<=25%	10.0	7.5
> 25%	12.5	10.0

IiMfuno zoVavanyo koomatshini:

Uvavanyo loBulukhuni;Iimvavanyo zoxinzelelo;iimvavanyo ezingonakalisi;Ukucoceka kwentsimbi;Ukuqina;Uvavanyo oluvuthayo

Phawula:

Izatifikethi zovavanyo lweMill ziya kukhutshwa ngokwe-EN10204.3.

Zonke iityhubhu ziya kubonelelwa ngokwe-ASTM A519 Specification esebenzayo.

Iityhubhu ziya kuba zingenamthungo kunye neendlela zovavanyo kunye neeNkcazo zoVavanyo lomatshini lweeMveliso zeNtsimbi.

Iiodolo zezinto eziphantsi kwe-A519 kufuneka zibandakanye Ubuninzi (Iinyawo, ubunzima, okanye inani lamaqhekeza), Igama lezinto (ikhabhoni engenamthungo okanye i-alloy steel mechanical tubing), ifom (ejikelezayo, isikwere, uxande okanye iimilo ezikhethekileyo).

Iiodolo zezinto eziphantsi kwe-A519 kufuneka zibonelele ngemeko yokuhanjiswa (A, N, QT, SR).

Ukupakisha kunye nokuMakisha

Zipakishwe zizithungu, zisongelwe ngeplastiki, kwaye zikhuselwe ngokufanelekileyo ukuba zihanjiswe ngokufanelekileyo elwandle okanye njengoko kuceliwe.

Ukumakishwa kufuneka ngokwe-MIL-STD-129 yeearhente zoMkhosi kwaye ngokuhambelana neFed.St.No.123 yee-arhente zoluntu kubandakanywa akukhawulelwanga: Standard, graded, size, heat no.hayi kakhulu.