I-SAE4130 Umbhobho Wentsimbi Ozotyiweyo Obandayo

SAE4130 Umbhobho Wentsimbi Ozotyiweyo Obandayo ongenamthungo oFakelwe umfanekiso

Inkcazelo emfutshane:

Umbhobho wentsimbi ongenamthungo otsaliweyo wenziwa ngomngxuma wentsimbi ongenamthungo.Iphinde iqhutywe ngumzobo obandayo phezu kwe-mandrel, ukulawula i-ID, kwaye ngokufa ukulawula i-OD.I-CDS iphezulu kumgangatho womphezulu, ukunyamezela kwe-dimensional kunye namandla xa kuthelekiswa ne-tubing eshushu egqityiweyo engenamthungo.Ngenxa yeempawu zokuchaneka okuphezulu, kwimveliso yomatshini ochanekileyo, iinxalenye zemoto, iisilinda ze-hydraulic, imboni yokwakha (i-steel sleeve) inoluhlu olubanzi kakhulu. yezicelo.

Ubukhulu: 16mm-89mm.

WT: 0.8mm-18 mm.

Ubume: Round.

Uhlobo lokuvelisa: Ukutsalwa ngokubanda okanye ukubanda kuqengqeleke.

Ubude: Ubude obubodwa obungacwangciswanga / Ubude obuphindwe kabini obungenamkhethe okanye njengesicelo somthengi sokwenyani ubude buyi-10m

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ukwakhiwa kwemichiza(%)

Umgangatho	IBanga	Amacandelo emichiza (%)
		C	Si	Mn	P	S	Mo	Cr	V
I-ASTM A519	4130	0.28-0.33	0.15-0.35	0.40-0.60	≤0.040	≤0.040	0.15-0.25	0.8-1.10	/

Iipropati zoomatshini

IBanga	Ukuhanjiswa	Tensile strength	Unikeze Amandla	Ukwandisa	Ukuqina
	Imeko	(Mpa) Min.	(Mpa) Min.	(%) Umz.	(HB) Umz.
4130	HR	621	483	20	89
	SR	724	586	10	95
	A	517	379	30	81
	N	621	414	20	89

Ukuhlaziya

Emva kokuba iimpahla zibande zitsalwa ngokwesayizi, iityhubhu zifakwa kwisithando somlilo sokunyanga ubushushu kunye nokulungisa.

Ukolulwa

I-post annealing, iimpahla zigqithiswa kumatshini wokulungelelanisa we-roller ezisixhenxe ukuze kuphunyezwe ukulungiswa okufanelekileyo kweetyhubhu.

Eddy yangoku

Ukolulwa kwesithuba, ityhubhu nganye idlula kumatshini we-eddy wangoku ukubona iintanda kunye nezinye iziphene.Iityhubhu kuphela ezidlula i-eddy current zilungele ukuhanjiswa kubathengi.

Ukugqiba

Ityhubhu nganye ifakwe i-oyile enganyangekiyo okanye inevanishi yokukhusela umphezulu kunye nokunganyangeki kwe-corrosion ngokwemfuno yabathengi, isiphelo setyhubhu nganye sigqunywe ngee-caps zeplastiki zokuphela kokuphela kokuphela komonakalo, ukumakishwa kunye ne-specs zibekwe kwaye iimpahla zilungele ukuthunyelwa. .

IMeko yokuHanjiswa kombhobho wentsimbi ebandayo

Ukutyunjwa	Uphawu	Inkcazo
Kuyabanda ukutsalwa/kunzima	+C	Akukho unyango lobushushu emva kwenkqubo yokugqibela ebandayo yokudweba
Kuyabanda ukutsalwa/thambile	+LC	Emva kokunyanga kobushushu bokugqibela kukho umzobo ofanelekileyo wokudlula
Ukubanda kwaye kuthotyiwe uxinzelelo	+SR	Emva kwenkqubo yokugqibela yokudweba ebandayo kukho ukunyanzeliswa koxinzelelo lonyango lokushisa kwindawo elawulwayo
I-Anealed	+A	Emva kwenkqubo yokugqibela ebandayo yokudweba iibhubhu zifakwe kwindawo elawulwayo
Iqhelekile	+N	Emva kokusebenza komzobo wokugqibela obandayo iityhubhu ziqhelekile kwindawo elawulwayo

Isicelo

Imibhobho yensimbi engenamthungo ye-Cold Drawn Carbon isetyenziswa kakhulu kwisixhobo senyukliya, ukuhanjiswa kwegesi, i-petrochemical, ukwakha iinqanawa kunye namashishini ebhoyila, kunye neempawu zokuxhathisa umhlwa okuphezulu kunye neempawu ezifanelekileyo zoomatshini.

- Isixhobo senyukliya
- Ukuhanjiswa kwerhasi

Ngaphambili: I-ASTM A519 1045 Umbhobho Wentsimbi Ozotyiweyo Obandayo

Okulandelayo:I-20Cr ingxubevange yemibhobho yentsimbi engenamthungo