Ubonelelo lwe-OEM oluPhakamileyo lokuxhathisa ngoxinzelelo oluLungileyo lwe-GB5310-1995 eshushu eQoqiweyo ebandayo eQoqiweyo yaseTshayina kwiFactory engenamthungo yombhobho wentsimbi.
Inkcazelo emfutshane:
I-GB 3087 20 # iityhubhu zentsimbi ezingenamthungo zisetyenziswa ngokubanzi ukwenza imibhobho yokufudumeza-imibhobho, izikhongozeli, imibhobho eqhumayo yeebhoyila zoxinzelelo oluphakathi.
Sizinikele kulawulo oluluqilima olugqwesileyo kunye nenkampani yabathengi enenkathalo, abasebenzi bethu abanamava abanxulumanisi bahlala befumaneka ukuze baxoxe ngeemfuno zakho kwaye benze ulonwabo oluthile lomthengi olupheleleyo lwe-OEM Supply High Pressure Resistance Good Toughness GB5310-1995 Hot Rolled Cold Rolled China Factory Seamless Steel Pipe, Thina bamkele abathengi, imibutho yamashishini kunye nabahlobo abavela kuwo onke amacandelo avela emhlabeni ukuze banxibelelane nathi kwaye bafumane intsebenziswano kwimiba elungileyo.
Uzinikele kulawulo oluluqilima olugqwesileyo kunye nenkampani yabathengi enenkathalo, abasebenzi bethu abanamava abanxulumana nabo bahlala befumaneka ukuze baxoxe ngeemfuno zakho kwaye benze ulonwabo oluthile lomthengiUmbhobho waseTshayina kunye noMbhobho wentsimbi, Kukwaneliseka kwabathengi bethu kwiimveliso kunye neenkonzo zethu ezihlala zisikhuthaza ukuba senze ngcono kweli shishini.Sakha ubudlelwane obunenzuzo ngokufanayo kunye nabathengi bethu ngokubanika ukhetho olukhulu lwamalungu emoto yeprimiyamu ngamaxabiso aphawulweyo.Sinikezela ngamaxabiso athengiswayo kuzo zonke iindawo zethu ezisemgangathweni ukuze uqinisekiswe ukonga okukhulu.
Ukwenziwa:Inkqubo engenamthungo ,Kugqitywe kushushu okanye kugqitywe kubanda.
Ubunzima bodonga(WT):3.2 mm——21 mm.
Idayimitha yangaphandle (OD):33 mm——323 mm.
Ubude:6M okanye ubude obuchaziweyo njengoko kufuneka.
Iphela:Isiphelo esicacileyo, isiphelo esiBeveled, sinyathelwe.
Izibuko loThutho: Tianjin, China.
Imigaqo yeNtlawulo:T / T, LC.
Ukuhanjiswa: iintsuku ezi-7-15 emva kwentlawulo.
Umphezulu: Iityhubhu ziza kuvanishi (Ngaphandle kuphela) ukunqanda umhlwa.
Ukumakishwa: iBanga eliMgangatho + leNsimbi + Ubungakanani + Ubushushu Hayi + iLothi yeNombolo.
Ukupakishwa: Iinyanda (ezinehexagonal), iibhokisi zoMthi, iiCreyithi (intsimbi/umthi) okanye njengoko kufuneka.
(1)Indlela yokwenza intsimbi
Isinyithi senziwa ngesithando sombane, isiguquli seoksijini okanye indlela yokuvula iziko.
(2)Indlela yokwenziwa kwetyhubhu engenanto
I-tube engenanto inokuveliswa ngendlela eshushu, kunye ne-billet eqhubekayo yokuphosa okanye i-ingot yensimbi nayo ingasetyenziswa.
(3)Indlela yokuvelisa umbhobho wentsimbi
Umbhobho wensimbi unokuveliswa ngokutshisa okutshisa (i-extrusion, isandiso) okanye umzobo obandayo (i-rolling) indlela engenamthungo.
| Umgangatho | IBanga leNsimbi | C | Si | Mn | S | P | Cr |
| GB 3087 | 10 | 0.07-0.13 | 0.17-0.37 | 0.35-0.65 | 0.02 | 0.025 | ≤0.15 |
| 20 | 0.17-0.23 | 0.17-0.37 | 0.35-0.65 | 0.02 | 0.025 | ≤0.25 |
| Umgangatho | Umbhobho wentsimbi | Ubunzima bodonga | Tensile strength | Unikeze Amandla | Ukwandisa |
| (mm) | (MPa) | (MPa) | % | ||
|
|
| ≥ | |||
| GB3087 | 10 | / | 335-475 | 195 | 24 |
| 20 | ＜15 | 410-550 | 245 | 20 | |
| ≥15 | 225 | ||||
| Uhlobo lombhobho wensimbi | Idayamitha yangaphandle(mm) | Ukunyamezelana | ||
| eqhelekileyo | phambili | |||
| Ityhubhu eshushu eqengqelekayo | OD | ≤159 | ±10% (min±0.50mm) | ±0.75%(min±0.40mm) |
| 159 | ±1.0% | ±0.90% | ||
| WT | ≤20 | ＋15.0%(min＋0.45mm) | ±10% (min±0.30mm) | |
| ＞20 | ±12.5% | ±10% | ||
| OD≥351 | ±15% | |||
| Umbhobho obandayo | OD | 10 ~ 30 | ±0.40mm | ±0.20mm |
| 30 ~ 50 | ± 0.45mm | ±0.25mm | ||
| ＞50 | ±1.0% | ±0.75% | ||
| WT | 1.5-3.0 | +15% | ±10% | |
| ＞3.0 | + 12.5% | ±10% | ||
(1)Uvavanyo lwe-hydraulic
Umbhobho wentsimbi kufuneka uvavanywe nge-hydraulically nganye nganye.
(2)Uvavanyo oluthambileyo
Imibhobho yentsimbi enobubanzi obungaphandle obungaphezulu kwe-22mm ukuya kwi-400mm kunye nobukhulu bodonga obungekho ngaphezu kwe-10mm iya kufakwa kuvavanyo lokucaba.
(3)Uvavanyo oluvuthayo
Umbhobho wensimbi kunye nobukhulu bodonga obungekho ngaphezu kwe-8 mm unokuvavanywa kwi-flare test kunye ne-taper ephezulu ye-30 °, 45 ° okanye 60 °.
(4) Uvavanyo lokugoba
Imibhobho yentsimbi enobubanzi obungaphandle obungekho ngaphezu kwe-22 mm iya kufakwa kuvavanyo lokugoba.
(5)Uvavanyo olungonakalisi
Ngokweemfuno zomthengi, umbhobho wensimbi uya kuvavanywa nge-ultrasonically nganye.
Indawo yangaphakathi nangaphandle yombhobho wensimbi ayinayo i-cracks, i-folds, i-creases, i-crusting okanye ukwahlukana, kwaye ezi ziphene kufuneka zisuswe ngokupheleleyo.Ubunzulu bokucoca abuyi kudlula ukutenxa okungalunganga kobunzima bodonga lwegama, kwaye ubukhulu bodonga lokwenene kwindawo yokucoca abuyi kuba ngaphantsi kobuncinci obuvunyelwe ludonga.
Ukupakishwa, ukuphawula kunye neenkcukacha zomgangatho weepayipi zensimbi ziya kuhambelana nemimiselo ye-GB / T 2102.
Sizinikele kulawulo oluluqilima olugqwesileyo kunye nenkampani yabathengi enenkathalo, abasebenzi bethu abanamava abanxulumanisi bahlala befumaneka ukuze baxoxe ngeemfuno zakho kwaye benze ulonwabo oluthile lomthengi olupheleleyo lwe-OEM Supply High Pressure Resistance Good Toughness GB5310-1995 Hot Rolled Cold Rolled China Factory Seamless Steel Pipe, Thina bamkele abathengi, imibutho yamashishini kunye nabahlobo abavela kuwo onke amacandelo avela emhlabeni ukuze banxibelelane nathi kwaye bafumane intsebenziswano kwimiba elungileyo.
Ubonelelo lweOEMUmbhobho waseTshayina kunye noMbhobho wentsimbi, Kukwaneliseka kwabathengi bethu kwiimveliso kunye neenkonzo zethu ezihlala zisikhuthaza ukuba senze ngcono kweli shishini.Sakha ubudlelwane obunenzuzo ngokufanayo kunye nabathengi bethu ngokubanika ukhetho olukhulu lwamalungu emoto yeprimiyamu ngamaxabiso aphawulweyo.Sinikezela ngamaxabiso athengiswayo kuzo zonke iindawo zethu ezisemgangathweni ukuze uqinisekiswe ukonga okukhulu.
