GB3087 iBoiler yoxinzelelo oluphantsi lombhobho wentsimbi ongenamthungo

Inkcazelo emfutshane:

I-GB 3087 20 # iityhubhu zentsimbi ezingenamthungo zisetyenziswa ngokubanzi ukwenza imibhobho yokufudumeza-imibhobho, izikhongozeli, imibhobho eqhumayo yeebhoyila zoxinzelelo oluphakathi.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

Ukwenziwa:Inkqubo engenamthungo ,Kugqitywe kushushu okanye kugqitywe kubanda.
Ubunzima bodonga(WT):3.2 mm——21 mm.
Idayimitha yangaphandle (OD):33 mm——323 mm.
Ubude:6M okanye ubude obuchaziweyo njengoko kufuneka.
Iphela:Isiphelo esicacileyo, isiphelo esiBeveled, sinyathelwe.

Iinkcukacha ezongezelelwe

Izibuko loThutho: Tianjin, China.
Imigaqo yeNtlawulo:T / T, LC.
Ukuhanjiswa: iintsuku ezi-7-15 emva kwentlawulo.
Umphezulu: Iityhubhu ziza kuvanishi (Ngaphandle kuphela) ukunqanda umhlwa.
Ukumakishwa: iBanga eliMgangatho + leNsimbi + Ubungakanani + Ubushushu Hayi + iLoti yeNombolo.
Ukupakishwa: Iinyanda (ezinehexagonal), iibhokisi zoMthi, iiCreyithi (intsimbi/umthi) okanye njengoko kufuneka.

Iindlela Zokuvelisa

(1)Indlela yokwenza intsimbi
Isinyithi senziwa ngesithando sombane, isiguquli seoksijini okanye indlela yokuvula iziko.

(2)Indlela yokwenziwa kwetyhubhu engenanto
I-tube engenanto inokuveliswa ngendlela eshushu, kunye ne-billet eqhubekayo yokuphosa okanye i-ingot yensimbi nayo ingasetyenziswa.

(3)Indlela yokuvelisa umbhobho wentsimbi
Umbhobho wensimbi unokuveliswa ngokutshisa okutshisa (i-extrusion, isandiso) okanye umzobo obandayo (i-rolling) indlela engenamthungo.

Umboniso weMveliso

GB3087 Umbhobho wentsimbi ongenamthungo2

GB3087 Umbhobho wentsimbi ongenamthungo1

Ukwakhiwa kwemichiza(%)

Umgangatho	IBanga leNsimbi	C	Si	Mn	S	P	Cr
GB 3087	10	0.07-0.13	0.17-0.37	0.35-0.65	0.02	0.025	≤0.15
GB 3087	20	0.17-0.23	0.17-0.37	0.35-0.65	0.02	0.025	≤0.25

Iipropati zoomatshini

Umgangatho	Umbhobho wentsimbi	Ubunzima bodonga	Tensile strength	Unikeze Amandla	Ukwandisa
		(mm)	(MPa)	(MPa)	%
				≥
GB3087	10	/	335-475	195	24
	20	＜15	410-550	245	20
	20	≥15	410-550	225	20

Ukutenxa okuvumelekileyo kweDayimitha yaNgaphandle kunye nokutyeba kodonga

Uhlobo lombhobho wensimbi	Idayamitha yangaphandle(mm)		Ukunyamezelana
Uhlobo lombhobho wensimbi	Idayamitha yangaphandle(mm)		eqhelekileyo	phambili
ityhubhu eshushu eqengqiwe	OD	≤159	±10% (min±0.50mm)	±0.75%(min±0.40mm)
	OD	159	±1.0%	±0.90%
	WT	≤20	＋15.0%(min＋0.45mm) －12.5%－0.35mm)	±10% (min±0.30mm)
		＞20	±12.5%	±10%
		OD≥351	±15%
Umbhobho obandayo	OD	10 ~ 30	±0.40mm	±0.20mm
		30 ~ 50	± 0.45mm	±0.25mm
		＞50	±1.0%	±0.75%
	WT	1.5-3.0	+15% -10%	±10%
	WT	＞3.0	+ 12.5% -10%	±10%

Uvavanyo

(1)Uvavanyo lwe-hydraulic
Umbhobho wentsimbi kufuneka uvavanywe nge-hydraulically nganye nganye.

(2)Uvavanyo oluthambileyo
Imibhobho yentsimbi enobubanzi obungaphandle obungaphezulu kwe-22mm ukuya kwi-400mm kunye nobukhulu bodonga obungekho ngaphezu kwe-10mm iya kufakwa kuvavanyo lokucaba.

(3)Uvavanyo oluvuthayo
Umbhobho wensimbi kunye nobukhulu bodonga obungekho ngaphezu kwe-8 mm unokuvavanywa kwi-flare test kunye ne-taper ephezulu ye-30 °, 45 ° okanye 60 °.

(4) Uvavanyo lokugoba
Imibhobho yentsimbi enobubanzi obungaphandle obungekho ngaphezu kwe-22 mm iya kufakwa kuvavanyo lokugoba.

(5)Uvavanyo olungonakalisi
Ngokweemfuno zomthengi, umbhobho wensimbi uya kuvavanywa nge-ultrasonically nganye.

Umgangatho womphezulu

Indawo yangaphakathi nangaphandle yombhobho wensimbi ayinayo i-cracks, i-folds, i-creases, i-crusting okanye ukwahlukana, kwaye ezi ziphene kufuneka zisuswe ngokupheleleyo.Ubunzulu bokucoca abuyi kudlula ukutenxa okungalunganga kobunzima bodonga lwegama, kwaye ubukhulu bodonga lokwenene kwindawo yokucoca abuyi kuba ngaphantsi kobuncinci obuvunyelwe ludonga.